Stationary phases and support materials , Solid stationary phases
المؤلف:
Sue Jickells , Adam Negrusz (Editors)
المصدر:
Clarkes Analytical Forensic Toxicology
الجزء والصفحة:
471
2026-11-19
81
Stationary phases and support materials
Solid stationary phases
In gas–solid chromatography, the stationary phase is an active solid at its operating tempera ture. A conventional packed column is filled completely by stationary phase particles, but in a capillary column a fine layer (usually less than 10 μm) of particles is adhered by proprietary processes to the inner surface of the tubing, to create a PLOT column. These solid phases may be inorganic materials (e.g. aluminium oxides, molecular sieves, silica gel, or graphitised carbon), or they may be organic polymers such as styrene. Both packed and capillary columns use similar solid-phase materials. Sample compounds undergo a dynamic gas solid adsorption–desorption process with the stationary phase, and since the particles are porous, size exclusion and shape selectivity processes also occur. The carrier gas (mobile phase) merely serves to sweep towards the detector those solute molecules that are not currently adsorbed. The resultant columns are highly retentive, and separations impossible with liquid phases can be accomplished easily on PLOT columns above ambient temperature. These columns are generally reserved for the separation of low-molecular-weight materials, such as hydrocarbon and sulfur gases, noble and permanent gases, and low boiling solvents. Since PLOT columns occasionally shed particles, their use is not advised with detectors that are affected adversely by the intrusion of particulate matter (the mass spectrometer is particularly vulnerable, as the column interface operates under vacuum).
0
0
الاكثر قراءة في تحليل السموم
اخر الاخبار
اخبار العتبة العباسية المقدسة