تاريخ الفيزياء
علماء الفيزياء
الفيزياء الكلاسيكية
الميكانيك
الديناميكا الحرارية
الكهربائية والمغناطيسية
الكهربائية
المغناطيسية
الكهرومغناطيسية
علم البصريات
تاريخ علم البصريات
الضوء
مواضيع عامة في علم البصريات
الصوت
الفيزياء الحديثة
النظرية النسبية
النظرية النسبية الخاصة
النظرية النسبية العامة
مواضيع عامة في النظرية النسبية
ميكانيكا الكم
الفيزياء الذرية
الفيزياء الجزيئية
الفيزياء النووية
مواضيع عامة في الفيزياء النووية
النشاط الاشعاعي
فيزياء الحالة الصلبة
الموصلات
أشباه الموصلات
العوازل
مواضيع عامة في الفيزياء الصلبة
فيزياء الجوامد
الليزر
أنواع الليزر
بعض تطبيقات الليزر
مواضيع عامة في الليزر
علم الفلك
تاريخ وعلماء علم الفلك
الثقوب السوداء
المجموعة الشمسية
الشمس
كوكب عطارد
كوكب الزهرة
كوكب الأرض
كوكب المريخ
كوكب المشتري
كوكب زحل
كوكب أورانوس
كوكب نبتون
كوكب بلوتو
القمر
كواكب ومواضيع اخرى
مواضيع عامة في علم الفلك
النجوم
البلازما
الألكترونيات
خواص المادة
الطاقة البديلة
الطاقة الشمسية
مواضيع عامة في الطاقة البديلة
المد والجزر
فيزياء الجسيمات
الفيزياء والعلوم الأخرى
الفيزياء الكيميائية
الفيزياء الرياضية
الفيزياء الحيوية
الفيزياء العامة
مواضيع عامة في الفيزياء
تجارب فيزيائية
مصطلحات وتعاريف فيزيائية
وحدات القياس الفيزيائية
طرائف الفيزياء
مواضيع اخرى
The transit telescope
المؤلف:
A. Roy, D. Clarke
المصدر:
Astronomy - Principles and Practice 4th ed
الجزء والصفحة:
p 343
29-8-2020
1685
The transit telescope
The transit telescope, or meridian circle, usually takes the form of a small refracting telescope but it is mounted on only one axis which is horizontal, lying along the east–west direction. In this way, the telescope is restricted to movement in one fixed plane so that it points in directions which all lie on the observatory’s meridian. The rotational axis is provided with a declination setting circle. The essential parts of the transit telescope are illustrated in figure 1 and an automated operational system is depicted in figure 2.
Figure 1. The transit telescope.
In its basic form, an eyepiece is fitted with a special graticule, the central vertical wire corresponding to the meridian. By setting the telescope to the correct altitude, the passage, or transit, of a star across the meridian can be timed accurately. This may be done by using the times of passage across each of the graticule wires in turn and taking a mean value for the transit of the central wire. At one time, the transit telescope’s function was to supply checks for master clocks which were, in turn, used to provide civil time. Nowadays, they are used to make regular checks on the rotational period of the Earth. They are also used to provide fundamental data for the purpose of determining the coordinates of celestial objects.
As with all experimental procedures, current measurements are made with electronic detectors
Figure 2. The CarlsbergMeridian Telescope with CCD detector system attached for the automatic monitoring of stellar transits. Both positions and brightnesses of over 100 000 stars are regularly recorded each night.
under computer control. The operation of the Carlsberg Meridian TelescopeW 20.7 has progressively improved since its establishment on La Palma in 1984, at that time being one of the world’s first automatic telescopes. The instrument was programmed to automatically set itself to the correct altitudes of about 500 stars in turn and measure the time of passage and their magnitudes. More recently, the photoelectric scanning-slit micrometer has been replaced by a CCD detector operating in a drift-scan mode. Between 100 000 and 200 000 stars are now measured each night and the limiting magnitude of the system is ∼17.
الاكثر قراءة في مواضيع عامة في علم الفلك
اخر الاخبار
اخبار العتبة العباسية المقدسة

الآخبار الصحية
